International Journal of

ADVANCED AND APPLIED SCIENCES

EISSN: 2313-3724, Print ISSN: 2313-626X

Frequency: 12
line decor
  
line decor

 Volume 11, Issue 12 (December 2024), Pages: 75-82

----------------------------------------------

 Original Research Paper

Effective pyrolysis of LDPE plastic waste to fuel using titanium dioxide catalyst

 Author(s): 

 M. Marhaini *, Dewi Fernianti, Muhammad Reza Aulia

 Affiliation(s):

 Department of Chemical Engineering, Universitas Muhammadiyah Palembang, Palembang, Indonesia

 Full text

  Full Text - PDF

 * Corresponding Author. 

  Corresponding author's ORCID profile: https://orcid.org/0000-0002-5733-922X

 Digital Object Identifier (DOI)

 https://doi.org/10.21833/ijaas.2024.12.009

 Abstract

The widespread use of plastics has led to increased consumption of fossil fuels and worsened pollution, especially in oceans. Common waste management methods like landfills and incinerators often focus more on convenience than on environmental and economic sustainability. For example, incineration releases harmful gases such as carbon monoxide (CO), carbon dioxide (CO2), ammonia (NH3), nitrous oxide (N2O), and nitrogen oxides (NOX), significantly contributing to greenhouse gas emissions. Burning one ton of waste can produce at least 700 kg of CO2. This study explores the use of Titanium Dioxide (TiO2), derived from minerals like ilmenite, rutile, and anatase, to enhance the pyrolysis process of Low-Density Polyethylene (LDPE) plastic waste. TiO2 helps stabilize heterogeneous catalysts and can improve the efficiency of plastic degradation, reduce the necessary temperatures, and shift the output from more liquid to more gas, with properties similar to commercial gasoline. The research tested different temperatures (300 °C, 350 °C, 400 °C, 450 °C) and catalyst amounts (12.5 g, 25 g, 37.5 g) to transform LDPE waste into liquid fuel. The best results were achieved at 350 °C with 37.5 g of catalyst, producing a fuel with a density of 0.7660 g/ml, viscosity of 1.04 mm2/s, calorific value of 36.1698 MJ/kg, and a flash point of 34 °C. Gas Chromatography-Mass Spectrometry (GC-MS) analysis showed that the fuel consisted of 49.41% gasoline, 10.56% kerosene-diesel, and 40.03% fatty acids. The findings indicate that using TiO2 as a catalyst in pyrolysis not only serves as a practical alternative to traditional waste management methods but also supports a more sustainable and economically beneficial approach to recycling plastic waste into usable fuel similar to gasoline. This method could significantly reduce the environmental impact of plastic waste and support economic development through innovative recycling technologies.

 © 2024 The Authors. Published by IASE.

 This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

 Keywords

 Plastic waste recycling, Titanium dioxide catalysis, Pyrolysis, Sustainable fuel production, Environmental impact reduction

 Article history

 Received 25 November 2023, Received in revised form 22 May 2024, Accepted 18 November 2024

 Acknowledgment

No Acknowledgment.

 Compliance with ethical standards

 Conflict of interest: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

 Citation:

 Marhaini M, Fernianti D, and Aulia MR (2024). Effective pyrolysis of LDPE plastic waste to fuel using titanium dioxide catalyst. International Journal of Advanced and Applied Sciences, 11(12): 75-82

 Permanent Link to this page

 Figures

 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 

 Tables

 Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 

----------------------------------------------   

 References (24)

  1. Brindhadevi K, Hiep BT, Khouj M, and Garalleh HA (2022). A study on biofuel produced from cracking of low density poly ethylenes using TiO2/AlSBA-15 nanocatalysts. Fuel, 323: 124299. https://doi.org/10.1016/j.fuel.2022.124299   [Google Scholar]
  2. Buekens A (2006). Introduction to feedstock recycling of plastics. In: Scheirs J and Kaminsky W (Eds.), Feedstock recycling and pyrolysis of waste plastics: 3-42. John Wiley and Sons, Ltd, Hoboken, USA. https://doi.org/10.1002/0470021543.ch1   [Google Scholar]
  3. Chen SY, Mochizuki T, Abe Y, Toba M, and Yoshimura Y (2013). Production of high-quality biodiesel fuels from various vegetable oils over Ti-incorporated SBA-15 mesoporous silica. Catalysis Communications, 41: 136-139. https://doi.org/10.1016/j.catcom.2013.07.021   [Google Scholar]
  4. Dement’ev KI, Bedenko SP, Minina YD, Mukusheva AA, Alekseeva OA, and Palankoev TA (2023). Catalytic pyrolysis of polystyrene waste in hydrocarbon medium. Polymers, 15(2): 290. https://doi.org/10.3390/polym15020290   [Google Scholar] PMid:36679171 PMCid:PMC9864068
  5. Eldahshory AI, Emara K, Abd-Elhady MS, and Ismail MA (2023). Catalytic pyrolysis of waste polypropylene using low-cost natural catalysts. Scientific Reports, 13: 11766. https://doi.org/10.1038/s41598-023-37769-8   [Google Scholar] PMid:37474551 PMCid:PMC10359456
  6. García RA, Serrano DP, and Otero D (2005). Catalytic cracking of HDPE over hybrid zeolitic–mesoporous materials. Journal of Analytical and Applied Pyrolysis, 74(1-2): 379-386. https://doi.org/10.1016/j.jaap.2004.11.002   [Google Scholar]
  7. Gopinath KP, Nagarajan VM, Krishnan A, and Malolan R (2020). A critical review on the influence of energy, environmental and economic factors on various processes used to handle and recycle plastic wastes: Development of a comprehensive index. Journal of Cleaner Production, 274: 123031. https://doi.org/10.1016/j.jclepro.2020.123031   [Google Scholar]
  8. Jaafar Y, Abdelouahed L, El Hage R, El Samrani A, and Taouk B (2022). Pyrolysis of common plastics and their mixtures to produce valuable petroleum-like products. Polymer Degradation and Stability, 195: 109770. https://doi.org/10.1016/j.polymdegradstab.2021.109770   [Google Scholar]
  9. Jaroszewska K, Fedyna M, and Trawczyński J (2019). Hydroisomerization of long-chain n-alkanes over Pt/AlSBA-15+ zeolite bimodal catalysts. Applied Catalysis B: Environmental, 255: 117756. https://doi.org/10.1016/j.apcatb.2019.117756   [Google Scholar]
  10. Jiang J, Shi K, Zhang X, Yu K, Zhang H, He J, Ju Y, and Liu J (2022). From plastic waste to wealth using chemical recycling: A review. Journal of Environmental Chemical Engineering, 10(1): 106867. https://doi.org/10.1016/j.jece.2021.106867   [Google Scholar]
  11. King S and Locock KE (2022). A circular economy framework for plastics: A semi-systematic review. Journal of Cleaner Production, 364: 132503. https://doi.org/10.1016/j.jclepro.2022.132503   [Google Scholar]
  12. MacArthur E (2017). The new plastics economy: Rethinking the future of plastics and catalysing action. Ellen MacArthur Foundation, Cowes, UK.   [Google Scholar]
  13. Maqsood T, Dai J, Zhang Y, Guang M, and Li B (2021). Pyrolysis of plastic species: A review of resources and products. Journal of analytical and applied pyrolysis, 159: 105295. https://doi.org/10.1016/j.jaap.2021.105295   [Google Scholar]
  14. Muthukumar K and Kasiraman G (2024). Utilization of fuel energy from single-use low-density polyethylene plastic waste on CI engine with hydrogen enrichment–An experimental study. Energy, 289: 129926. https://doi.org/10.1016/j.energy.2023.129926   [Google Scholar]
  15. Ochoa A, Bilbao J, Gayubo AG, and Castaño P (2020). Coke formation and deactivation during catalytic reforming of biomass and waste pyrolysis products: A review. Renewable and Sustainable Energy Reviews, 119: 109600. https://doi.org/10.1016/j.rser.2019.109600   [Google Scholar]
  16. Papuga S, Djurdjevic M, Ciccioli A, and Vecchio Ciprioti S (2022). Catalytic pyrolysis of plastic waste and molecular symmetry effects: A review. Symmetry, 15(1): 38. https://doi.org/10.3390/sym15010038   [Google Scholar]
  17. Prurapark R, Owjaraen K, Saengphrom B, Limthongtip I, and Tongam N (2020). Effect of temperature on pyrolysis oil using high-density polyethylene and polyethylene terephthalate sources from mobile pyrolysis plant. Frontiers in Energy Research, 8: 541535. https://doi.org/10.3389/fenrg.2020.541535   [Google Scholar]
  18. Sharuddin SDA, Abnisa F, Daud WMAW, and Aroua MK (2016). A review on pyrolysis of plastic wastes. Energy Conversion and Management, 115: 308-326. https://doi.org/10.1016/j.enconman.2016.02.037   [Google Scholar]
  19. Thangavel V, Subramanian B, and Ponnusamy VK (2023). Investigations on the effect of H2 and HHO gas induction on brake thermal efficiency of dual-fuel CI engine. Fuel, 337: 126888. https://doi.org/10.1016/j.fuel.2022.126888   [Google Scholar]
  20. Tiseo I (2022). Global plastic production 1950-2020. Statista, Hamburg, Germany.   [Google Scholar]
  21. Toktarova A, Göransson L, Thunman H, and Johnsson F (2022). Thermochemical recycling of plastics–Modeling the implications for the electricity system. Journal of Cleaner Production, 374: 133891. https://doi.org/10.1016/j.jclepro.2022.133891   [Google Scholar]
  22. Xayachak T, Haque N, Parthasarathy R, King S, Emami N, Lau D, and Pramanik BK (2022). Pyrolysis for plastic waste management: An engineering perspective. Journal of Environmental Chemical Engineering, 10(6): 108865. https://doi.org/10.1016/j.jece.2022.108865   [Google Scholar]
  23. Yu L, Farinmade A, Ajumobi O, Su Y, John VT, and Valla JA (2020). MCM-41/ZSM-5 composite particles for the catalytic fast pyrolysis of biomass. Applied Catalysis A: General, 602: 117727. https://doi.org/10.1016/j.apcata.2020.117727   [Google Scholar]
  24. Zheng Y, Tao L, Yang X, Huang Y, Liu C, and Zheng Z (2018). Study of the thermal behavior, kinetics, and product characterization of biomass and low-density polyethylene co-pyrolysis by thermogravimetric analysis and pyrolysis-GC/MS. Journal of Analytical and Applied Pyrolysis, 133: 185-197. https://doi.org/10.1016/j.jaap.2018.04.001   [Google Scholar]