International Journal of Advanced and Applied Sciences
Int. j. adv. appl. sci.
EISSN: 2313-3724
Print ISSN: 2313-626X
Volume 4, Issue 5 (May 2017), Pages: 133-137
Title: A novel buck-boost converter
Author(s): Farzin Asadi 1, *, Nurettin Abut 2, Ismet Kandilli 3
Affiliation(s):
1Mechatronics Engineering Department, Kocaeli University, Kocaeli, Turkey
2Electrical Engineering Department, Kocaeli University, Kocaeli, Turkey
3Electronics and Automation Department, Kocaeli University, Kocaeli, Turkey
https://doi.org/10.21833/ijaas.2017.05.023
Abstract:
In this paper, a novel buck-boost converter with the voltage gain of 2𝐷−1/1−𝐷 is proposed. Output voltage is positive and the voltage stresses on the power switches and the diodes are low. Suggested topology is based on conventional boost converter. Proposed converter can provide a large step down voltage conversion ratio. Control of converter can be done with a simple I-type (Integrator) controller.
© 2017 The Authors. Published by IASE.
This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Keywords: Buck-boost converter, Low stress, Non-minimum phase system, State space averaging
Article History: Received 19 January 2017, Received in revised form 28 April 2017, Accepted 28 April 2017
Digital Object Identifier:
https://doi.org/10.21833/ijaas.2017.05.023
Citation:
Asadi F, Abut N, and Kandilli I (2017). A novel buck-boost converter. International Journal of Advanced and Applied Sciences, 4(5): 133-137
http://www.science-gate.com/IJAAS/V4I5/Asadi.html
References:
| Changchien SK, Liang TJ, Chen JF, and Yang LS (2010). Novel high step-up DC–DC converter for fuel cell energy conversion system. IEEE Transactions on Industrial Electronics, 57(6): 2007-2017. https://doi.org/10.1109/TIE.2009.2026364 |
||||
| Hwu KI and Yau YT (2008). A novel voltage-bucking/boosting converter: KY buck-boost converter. In the IEEE International Conference on Industrial Technology (ICIT'08), IEEE, Chengdu, China: 1-4. https://doi.org/10.1109/icit.2008.4608692 |
||||
| Hwu KI, Chen YH, and Lin ZF (2009a). Negative-output KY buck-boost converter. In the 4th IEEE Conference on Industrial Electronics and Applications (ICIEA'09), IEEE, Xi'an, China: 3347-3350. https://doi.org/10.1109/ICIEA.2009.5138823 | ||||
| Hwu KI, Lin ZF, and Chen YH (2009b). A novel negative-output KY buck-boost converter. In the International Conference on Power Electronics and Drive Systems (PEDS'09), IEEE: 1158-1162. https://doi.org/10.1109/PEDS.2009.5385717 | ||||
| Ismail EH, Al-Saffar MA, Sabzali AJ, and Fardoun AA (2008). A family of single-switch PWM converters with high step-up conversion ratio. IEEE Transactions on Circuits and Systems I: Regular Papers, 55(4): 1159-1171. https://doi.org/10.1109/TCSI.2008.916427 |
||||
| Liao HK, Liang TJ, Yang LS, and Chen JF (2012). Non-inverting buck–boost converter with interleaved technique for fuel-cell system. IET Power Electron, 5(8): 1379–1388. https://doi.org/10.1049/iet-pel.2011.0102 |
||||
| Liu WS, Chen JF, Liang TJ, and Lin RL (2010). Analysis, design, and control of bidirectional cascaded configuration for a fuel cell hybrid power system. IEEE Transactions on Power Electronics, 25(6): 1565-1575. https://doi.org/10.1109/TPEL.2009.2037003 |
||||
| Luo FL and Ye H (2004). Positive output multiple-lift push-pull switched-capacitor Luo-converters. IEEE Transactions on Industrial Electronics, 51(3): 594-602. https://doi.org/10.1109/TIE.2004.825344 |
||||
| Miao S, Wang F, and Ma X (2016). A novel buck-boost converter with low stresses on switches and diodes. In the 8th IEEE International Conference on Power Electronics and Motion Control (IPEMC-ECCE Asia), IEEE, Hefei, China: 3344-3347. https://doi.org/10.1109/IPEMC.2016.7512831 | ||||
| Ren X, Tang Z, Xuan R, Wei J, and Hua G (2008). Four switch buck–boost converter for telecom DC–DC power supply applications. In the 23rd Annual IEEE Conference on Applied Power Electronics and Exposition (APEC'08), IEEE, Austin, USA: 1527–1530. https://doi.org/10.1109/APEC.2008. 4522927 | ||||
| Sahu B and Rincón-Mora GA (2004). A low voltage, dynamic, noninverting, synchronous buck-boost converter for portable applications. IEEE Transactions on Power Electronics, 19(2): 443-452. https://doi.org/10.1109/TPEL.2003.823196 |
||||
| Zhu M and Luo L (2007a). Implementing of developed voltage lift technique on SEPIC, Cuk and double-output DC–DC converters. In the 2nd IEEE Conference on Industrial Electronics and Applications (ICIEA'07), IEEE: 674–681. https://doi.org/10.1109/ICIEA.2007.4318492 | ||||
| Zhu M and Luo L (2007b). Development of voltage lifts technique on double output transformer less DC–DC converter. In the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON'07), IEEE, Taipei, Taiwan: 1983–1988. https://doi.org/10.1109/IECON.2007.4460172 | ||||