International Journal of Advanced and Applied Sciences
Int. j. adv. appl. sci.
EISSN: 2313-3724
Print ISSN:2313-626X
Volume 3, Issue 9 (September 2016), Pages: 6-9
Title: Modeling and control of a doubly fed induction machine (DFIM)
Author(s): Badr M. Alshammari
Affiliation(s):
College of Engineering, University of Hail, Hail City, Saudi Arabia
https://doi.org/10.21833/ijaas.2016.09.002
Abstract:
In this paper, the behavior of a doubly fed induction machine (DFIM) is presented. It is functioning in mode motor and of which the rotor and the stator are fed through the intermediary of a chain of conversion of AC/AC type. The latter is composed of a converter AC/DC (three phase rectifier to diodes), a LC filter and a second converter DC/AC (inverter ordered while running to Modulation of Width of impulses). So, we adopted a strategy of survey having for objective to make servitude quickly of the DFIM while applying the order to flux oriented statorique led then of a regulating PI.
© 2016 The Authors. Published by IASE.
This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Keywords: Vector control, Doubly fed asynchronous machine, Pulse width modulation, PI controller
Article History: Received 4 June 2016, Received in revised form 7 September 2016, Accepted 15 September 2016
Digital Object Identifier: https://doi.org/10.21833/ijaas.2016.09.002
Citation:
Alshammari BM (2016). Modeling and control of a doubly fed induction machine (DFIM). International Journal of Advanced and Applied Sciences, 3(9): 6-9
http://www.science-gate.com/IJAAS/V3I9/Alshammari.html
References:
| Akagi H and Sato H (2002). Control and performance of a doubly-fed induction machine intended for a flywheel energy storage system. IEEE Transactions on Power Electronics, 17(1): 109-116. http://dx.doi.org/10.1109/63.988676 |
||||
| Ledesma P and Usaola J (2004). Effect of neglecting stator transients in doubly fed induction generators models. IEEE transactions on energy conversion, 19(2): 459-461. http://dx.doi.org/10.1109/TEC.2004.827045 |
||||
| Monroy A and Alvarez-Icaza L (2006). Passivity based control of a DFIG wind turbine. In the IEEE American Control Conference, Minnesota, USA: 1050-1055. http://dx.doi.org/10.1109/acc.2006.1655498 |
||||
| Morel L, Godfroid H, Mirzaian A and Kauffmann JM (1998). Double-fed induction machine: converter optimization and field oriented control without position sensor. IEE Proceedings-Electric Power Applications, 145(4): 360-368. http://dx.doi.org/10.1049/ip-epa:19981982 |
||||
| Ottersten R (2000). Vector control of a double-sided PWM converter and induction machine drive. Chalmers University of Technology, Goteborg, Sweden, Licentiate. | ||||
| Pena R, Cardenas R, Asher GM, Clare JC, Rodriguez J and Cortes P (2002). Vector control of a diesel-driven doubly fed induction machine for a stand-alone variable speed energy system. In the 28th Annual IEEE Conference of the Industrial Electronics Society (IECON 02): 985-990. http://dx.doi.org/10.1109/iecon.2002.1185406 |
||||
| Poller MA (2003). Doubly-fed induction machine models for stability assessment of wind farms. In the IEEE conference of the Power Tech, Bologna, Italy: 23–26. http://dx.doi.org/10.1109/ptc.2003.1304462 |
||||
| Wu FK, Yeh TJ and Huang CF (2013). Motor control and torque coordination of an electric vehicle actuated by two in-wheel motors. Mechatronics, 23(1): 46-60. http://dx.doi.org/10.1016/j.mechatronics.2012.10.008 |
||||